The CST TF1 represents an uncompromising pursuit for the ultimate in rifle accuracy. Whether you desire a competitive edge or just simply the absolute best, ask us how CST can provide you with the ultimate tool for the job, and the definitive piece of mind that comes with it.
The CST TF1 Precision Bolt Action Receiver!
The CST TF1 bolt action receiver incorporates ground breaking innovations making it the most advanced bolt action design to date. Rather than emulate century year old technology, the CST TF1 has been engineered specifically from the ground up to provide the most accurate shooting platform obtainable.
As with other competition grade receivers, theTF1 is machined from premium materials to rigid geometric tolerances. What truly sets the TF1 apart however is a smarter design eliminating flaws of conventional bolt action rifles.
Angled screw holes allow the use of a single entry opening at the bottom of the stock, while offering double the torque at each of three bedding blocks. This system generates triple the torque of conventional bolt action rifles.
Cone-Loktm Bolt:
The heart of the TF1 design’s accuracy potential lies with the cone shaped locking lugs and the cone shaped floating bolt handle. Both the locking lugs and bolt handle are matched to precision conical seats machined in the receiver concentric to each other and center of bore.
Upon bolt lock up, the floating bolt handle becomes pressurized to force both the rear and front of the bolt to seat dead center and square every time, regardless of bolt diameter fit or wear. With this system, pressure to all locking lugs is maintained even after the sear is released when pressing the trigger.
*Cone-Lok tm bolt design utilizes cone shaped locking lugs and a cone shaped floating bolt handle forcing both the rear and the front of the bolt to seat dead center and square upon closing the bolt. Continuous and uniform pressure of all locking lugs is maintained even after the sear is released by pressing the trigger.
*Rather than a double action-screw design with small pillars, the CST TF1 utilizes three large bedding blocks housing a total of six angle-entry action-screws.
*Firing mechanism that replaces the conventional coil spring with more efficient disk springs eliminating wasteful radial deflection, allowing less firing pin travel, and ultimately creating faster lock-time.
*Rear-magnetized .062” firing pin tip maintains contact with the firing mechanism while floating inside the bolt bind-free.
*180-degree wrap-around integral recoil lug provides true parallel to bore recoil surfaces.
*Floating ejector button will not influence a chambered cartridge and allows manually controlled ejection force.
*Three lug design with 60-degree bolt throw with dual-cam cocking mechanism for easy bolt lift.
*Full-length integral Picatinny or Kelby style scope base also available in 20 MOA or 40 MOA versions.
*Standard models feature trigger hangers fully adjustable for setting correct firing pin travel and detachable through trigger guard slot.
*Traditional easy to use mauser style bolt release will not damage locking lug surfaces of the bolt during hard retraction.
Contact us about pricing and availability
Custom Shooting Technologies, Inc.
8794 Elmburg Rd.
Bagdad, KY 40003
(502) 797-3380 (orders) (502) 747-8380 (fax)
